PS-AWB121 Single 12" Amplified Bass Enclosure
- Single 12" 200 Watt RMS Amplified Bass Reflex Subwoofer Enclosure
- Injection Molded PP Cone Woofer
- 2" BASV Voice Coil Former
- Large Roll Butyl Rubber Surround
- Computer Optimized Bass Reflex Enclosure
- Durable Aircraft Grade Vinyl Finish
- 1-Channel 200 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz – 200Hz
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included


SINGLE 12" VENTED LOADED BASS REFLEX ENCLOSURE
Bass is our backbone here at PowerBass and our engineers have designed an affordable, yet powerful self contained solution to put a new low in the bottom end of your sound system with PS-AWB loaded woofer boxes. We take a unique design approach and engineer the woofers to fit the box, not the other way around like our competition. This gives our enclosures a deeper, tighter bass that handles more power for your hard earned cash. We match it with a PWM Amplifier to make the power that it takes to get the bass you want.
We feature a vented “bass reflex” enclosures with slotted ports tuned to a very low frequency for loud bass that shakes every bone in your body. When you want to add bass to our system and don't want to break the bank, the PS-AWB Loaded Enclosures are the definite choice of the discriminating music lover.
Specifications
- Inputs: Low Level (RCA)/High Level (speaker level)
- Equalization Boost/Cut: 0dB - 12 dB @45 Hz
- Subwoofer Frequency Range: 20 Hz - 200 Hz
- Power Supply: PWM MOSFET
- Bottom Depth: 14.4"
- Top Depth: 12.25"
- Height: 13.5"
- Width: 18.75"
- Voice Coil Size: 2"
- Material: Injection molded Polypropylene cone
- Dimensions (in Inches): 13.5" x 18.75" x 12.25" Top D x 14.4" Bottom D
- S/N Ratio: >85 dB
- Total Harmonic Distortion: 0.5% at Rated Power
- Spl: 86 db
- Size: Single 12"
- Frequency Response: 30 Hz - 250 Hz
- Power Handling (RMS/Peak): 200 / 400 watts
Downloads
PS-AWB121 Single 12" Amplified Bass Enclosure

Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
