L2-692T 6x9" Thin Full-Range
- 6x9" Thin Mount Co-Axial Speaker System
- OEM Drop in Replacement Design
- Grey Injection Molded PP/Carbon Fiber Cone
- Butyl Rubber Surround
- 10 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 0.75" Aluminum Dome Tweeter
- SEL Tweeter Ring (Sound Expander Lens)
- 2-ohm System Impedance
Read more
L2-692T 6x9" THIN MOUNT UPGRADE 2Ω OEM REPLACEMENT SPEAKER SYSTEM
Completely redesigned and re-engineered for today’s modern vehicles, our new L Series was designed to upgrade factory systems to deliver the musical performance you demand. The L Series Wave Guide Lens compliments the ¾” Aluminum Alloy Dome tweeter to increase sonic dispersion allowing you to hear even more details from your favorite rap, hip hop or rock music like never before.
Utilizing a 2-OHM voice coil the L Series is engineered to work in modern vehicles where a lower OHM rating is required. This lower impedance will make more efficient use of your amplifier's power.
To handle this power we include upgraded features like the custom tooled stamped baskets, our new Injected PP/Carbon Fiber Cones to produce the best in distortion free sound reproduction, Butyl Rubber Surrounds for high efficiency, increased bass response and long life, and larger motor structures to handle increased power.
Now available in hard to find 7” full range, 7” mid range, and 6x9” Thin Mount, the L Series Full Range Speakers will give your vehicle the sonic upgrade you have been looking for.
*NOT DESIGNED FOR USE WITH AFTERMARKET HEADUNITS AND AMPLIFIERS*
Specifications
- Nominal Impedance: 2-ohm
- Material: Injection Molded PP cone with Carbon Fiber/ aluminum done tweeter
- Magnet Size: 10 oz
- Sensitivity (1W / 1M): 89 dB
- Mounting Depth: 2.48 in
- Size: 6x9 in
- Sensitivity: 89 dB
- Frequency Response: 50Hz - 21Khz
- Power Handling (RMS/Peak): 60 / 180W
Downloads
L2-692T 6x9" Thin Full-Range
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
