POWERBASS
Products
SHOW
SORT BY
FILTER
IN STOCK NOW!
- Fits 3XL Series Subwoofers
- 15" Black Steel Mesh Grill
- Corrosion Resistant Black Finish
- Mounts with no additional hardware needed
- One Piece Uni-Body Design
IN STOCK NOW!
- Fits 2XL & 3XL Series Subwoofers
- 12" Black Steel Mesh Grill
- Corrosion Resistant Black Finish
- Mounts with no additional hardware needed
- One Piece Uni-Body Design
IN STOCK NOW!
- Fits 2XL-1040D
- 10" Black Steel Mesh Grill
- Corrosion Resistant Black Finish
- Mounts with no additional hardware needed
- One Piece Uni-Body Design
- IPX67 Water Resistant Sealed Design
- Aluminum Die-Cast end caps with integrated input / output connectors
- 1200 Watt High Efficiency Full-Range Class D Design
- 2-OHM Stable Stereo Amplifier
- International Rectifier® Chip Set
- Ultra Low Current Draw
- 4-Layer Copper Plated PCB
- Conformal Coated PC Board
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- High Current Voltage Ripple Rejection Circuitry
- 3.5mm AUX Input
- 3.5mm AUX Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low/High Pass Electronic Crossover
- Variable 18dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Remote Gain Control Included
- IPX67 Water Resistant Sealed Design
- Aluminum Die-Cast end caps with integrated input / output connectors
- 2000 Watt High Efficiency Full-Range Class D Design
- 2-OHM Stable Stereo Amplifier
- International Rectifier® Chip Set
- Ultra Low Current Draw
- 4-Layer Copper Plated PCB
- Conformal Coated PC Board
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- High Current Voltage Ripple Rejection Circuitry
- 3.5mm AUX Input
- 3.5mm AUX Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low/High Pass Electronic Crossover
- Variable 18dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
- Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 10” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 200 Watt High Efficiency Class D Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 10.9"W x 3.2"H x 14.4"D
- New Polycarbonate Glass Fiber Basket
- Power Sports 12" Subwoofer
- Gun Metal powder coated aluminum grill included
- Injection Molded UV-Treated Gun Metal Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 120 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- 250 Watts RMS/500 Watts Max
- Designed for FREE AIR applications and Sealed Enclosures
- New Polycarbonate Glass Fiber Basket
- Marine Grade 10" Subwoofer
- Black power-coated Aluminum grill included
- Injection Molded UV-Treated Gun Metal Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 140 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- 200 Watts RMS/400 Watts Max
- Designed for FREE AIR Applications and Sealed Enclosures
- 6 x 9" Upgraded OEM Replacement Component System
- 80 Watts RMS/160 Watts Max
- Injection Molded PP Cone
- 20 oz. Magnet
- Nylon OEM Speaker Adapter
- 1” Inverted Titanium Dome Tweeter
- Inline Crossovers
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
- APPLICATIONS
- FORD Front Locations
- LINCOLN Front Locations
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications
2015-UP F-150
2018-UP F-250
2018-UP F-350
2018-UP EXPEDITION
2011-UP EXPLORER
2018-UP NAVIGATOR
Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems
- 60 Watts RMS/120 Watts Max
- Injection Molded PP Cone
- 10 oz. Magnet
- Nylon OEM Speaker Adapter
- 1” Inverted Titanium Dome Tweeter
- Inline Crossovers
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
-
APPLICATIONS
- FORD
- LINCOLN
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications
2019 Ranger Front Location
2015-UP F-150 Rear Location
2018-UP F-250 Rear Location
2018-UP F-350 Rear Location
2018-UP EXPEDITION Rear Location
2011-UP EXPLORER Rear Location
2011-UP EDGE
2012-UP FOCUS
2013-UP FUSION
2010-UP MUSTANG
2011-UP FIESTA
2011-UP FLEX
2015-UP TRANSIT CONNECT
2013-UP ESCAPE
2013-UP C-MAX
2016-UP MKX
2018-UP NAVIGATOR Rear Location
Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems
- 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
- 80 Watts RMS/160 Watts Max
- Injection Molded PP Cone
- Nylon OEM Speaker Adapter
- 1” Silk Dome Tweeter
- 20 oz. Magnet
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
- APPLICATIONS
- FORD Front Locations
- LINCOLN Front Locations
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications
2015-UP F-150
2018-UP F-250
2018-UP F-350
2018-UP EXPEDITION
2011-UP EXPLORER
2018-UP NAVIGATOR
Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems
-
APPLICATIONS
- FORD
- LINCOLN
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications
2019 Ranger Front & Rear Locations
2015-UP F-150 Rear Location
2018-UP F-250 Rear Location
2018-UP F-350 Rear Location
2018-UP EXPEDITION Rear Location
2011-UP EXPLORER Rear Location
2011-UP EDGE
2012-UP FOCUS
2013-UP FUSION
2010-UP MUSTANG
2011-UP FIESTA
2011-UP FLEX
2015-UP TRANSIT CONNECT
2013-UP ESCAPE
2013-UP C-MAX
2016-UP MKX
2018-UP NAVIGATOR Rear Location
Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems
- 230’ 8 Gauge Power Wire
- 336 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
- New PBX logo dust cap
- 12" Shallow Mount Subwoofer Dual 4-Ohm Subwoofer
- 400 Watts RMS/800 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- Proprietary Composite Poly/Glass Fiber Basket
- 2" Vented KSV Voice Coil Former
- Chrome Push Terminals
- 3.8" Mounting Depth
- 400 Watts RMS/800 Watts Max
- New PBX logo dust cap
- 10" Shallow Mount Dual 4-Ohm Subwoofer
- 350 Watts RMS/700 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- High Roll Santoprene® Surround
- 2.0" Vented KSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Small Sealed Enclosures
- 100’ 4 Gauge Ground Wire
- 882 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
IN STOCK NOW!
- Marine Grade 8" 2-Way Pod Speakers
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Black Chrome Plated Die-Cast Swivel Thin Mount Clamp System
- Fits Bar Sizes 1.5" - 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets
IN STOCK NOW!
- Marine Grade 5.25" 2-Way Pod Speakers
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Black Chrome Plated Die-Cast Swivel Thin Mount Clamp System
- Fits Bar Sizes 1.5" - 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets
IN STOCK NOW!
- Marine Grade 6.5" 2-Way Pod Speakers
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Black Chrome Plated Die-Cast Swivel Thin Mount Clamp System
- Fits Bar Sizes 1.5" - 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets