POWERBASS
Products
SHOW
SORT BY
FILTER
- 990 Watt 5 Channel High Efficiency Full-Range Class D Design
- 2-OHM Stable Stereo Amplifier
- International Rectifier® Chip Set
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- Conformal Coated PC Board
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- High Current Voltage Ripple Rejection Circuitry
- 3.5mm AUX Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low/High Pass Electronic Crossover
- Variable 18dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 8" Co-Axial Weather Proof Speaker System
- Polypropylene Cone
- Rubber Surround
- 20 oz. Motor Structure
- Gold Terminals
- Water Proof Trampoline Voice Coil Gasket
- 1" Mylar Dome Tweeter
- Black Powder Coated Steel Basket
- Stainless Steel Mounting Hardware
- Includes Both White and Black Aluminum Mesh Grills
- 3-ohm System Impedance
- 6 x 9" Co-Axial Weather Proof Speaker System
- Polypropylene Cone
- Rubber Surround
- 30 oz Motor Structure
- Gold Terminals
- Water Proof Trampoline Voice Coil Gasket
- 1" Mylar Dome Tweeter
- Black Powder Coated Steel Basket
- Stainless Steel Mounting Hardware
- Includes Both White and Black Aluminum Mesh Grills
- 3-ohm System Impedance
- 5.25" Co-Axial Weather Proof Speaker System
- Polypropylene Cone
- Rubber Surround
- 12 oz Motor Structure
- Gold Terminals
- Water Proof Trampoline Voice Coil Gasket
- 1" Mylar Dome Tweeter
- Black Powder Coated Steel Basket
- Stainless Steel Mounting Hardware
- Includes Both White and Black Aluminum Mesh Grills
- 3-ohm System Impedance
- 4" Co-Axial Weather Proof Speaker System
- Polypropylene Cone
- Rubber Surround
- 10 oz Motor Structure
- Gold Terminals
- Water Proof Trampoline Voice Coil Gasket
- 1" Mylar Dome Tweeter
- Black Powder Coated Steel Basket
- Stainless Steel Mounting Hardware
- Includes Both White and Black Aluminum Mesh Grills
- 3-ohm System Impedance
- 100’ 4 Gauge Ground Wire
- 882 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Black Satin PVC Insulation Jacket
- 230’ 8 Gauge Ground Wire
- 336 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
- 500’ 16 Gauge Speaker Wire
- 60 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
- 330’ 12 Gauge Speaker Wire
- 135 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
- 15" Dual 1-Ohm Xtreme Super Woofer
- 3,500 Watts RMS/7,0000 Watts Max
- Non-pressed Raw Paper Pulp DDC Coated Cone
- 4” HD BASV Flat Wound Voice Coil/Former
- U-Turn High Roll Treated Foam Surround
- Sextuplet 10" Progressive Roll Conex Surrounds
- Dual Nickel 5-way 4 gauge Pro-lock Input Terminals
- Massive Quad 160 oz Stacked MAgnets (40lbs/640 oz total)
- Hyper Extended One-Piece Vented Back Plate
- Heavy Duty Competition CNC Cut Cast Aluminum Frame
- Designed for Larger Ported Enclosures
- Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 8” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 150 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 9.75"W x 2.75"H x 13.5"D
- Converts Speaker Level to Low Level RCA for our XMA and XL Amplifiers
- Easy Installation w/Pro-lock inputs
- 6x9" Thin Mount Co-Axial Speaker System
- OEM Drop in Replacement Design
- Grey Injection Molded PP/Carbon Fiber Cone
- Butyl Rubber Surround
- 10 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 0.75" Aluminum Dome Tweeter
- SEL Tweeter Ring (Sound Expander Lens)
- 2-ohm System Impedance
- 7" Woofer/Speaker System
- OEM Drop in Replacement Design
- Grey Injection Molded PP/Carbon Fiber Cone
- Butyl Rubber Surround
- 16 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 2-ohm System Impedance
- Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 60 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Orange-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 17' Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 80 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 4 Gauge Orange-Flex Power Wire
- 7' 4 Gauge Black-Flex Ground Wire
- 17' 16 Gauge Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- 12" Single 4-Ohm Woofer
- 250 watt RMS/500 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
- 10" Single 4-Ohm Woofer
- 225 watt RMS/450 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
- Computer Optimized 10" Thin Subwoofer Enclosure
- 275 watt RMS/550 Watts Max
- One Piece Injection Molded Cone
- Single Piece Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Single 4-ohm Input
- Marine Grade 6.5" 2-Way Pod Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- Water Tight TPU Surround
- Ultra Efficient Compression Horn Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Polished Aluminum Mounting Clamps
- Fits Tower Bar Sizes 2" - 2.75" (will fit 1.5", 1.75", 1.875" & 2.375" w/XLPOD INSERTS sold separately)
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets