POWERBASS
Products
SHOW
SORT BY
FILTER
- Premium OFC (Oxygen Free Copper) Interconnect RCA’s
- Twisted Pair and Double Shielded for Maximum Noise Rejection
- Custom Molded Connectors
- Perfect fitment for Standard or Tiffany type connections
- Premium OFC (Oxygen Free Copper) Interconnect RCA’s
- Twisted Pair and Double Shielded for Maximum Noise Rejection
- Custom Molded Connectors
- Perfect fitment for Standard or Tiffany type connections
- 8" Pro Audio Mid-range
- Octagonal for easy stacking for more surface area
- Hybrid Carbon/DDC Stiff Paper Cone
- Pro Audio Double Roll Textile Surround
- Chrome Push Input Terminals
- 2" BASV Voice Coil
- 80 oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- 4-ohm System Impedance
- Grills Included
- Sold Individually
- 6.5" Pro Audio Mid-range
- Octagonal easy stacking for more surface area
- Hybrid Carbon/DDC Stiff Paper Cone
- Pro Audio Double Roll Textile Surround
- Chrome Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 40 oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Grills Included
- Sold Individually
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- Heavy Duty Single 12" Thin Truck Enclosure
- Computer Optimized Acoustic Chamber
- 2-Layer DDC Coated Black Ribbed Paper Cone
- 2" BASV High Temperature Voice Coil
- Double Pressed Treated Foam Surround
- 2-Tone Aircraft Grade Vinyl Finish
- Single 4-ohm Input
- 300 Watts RMS/600 Watts Max
- Mounting Hardware Included
- Heavy Duty Single 10" Thin Truck Enclosure
- Computer Optimized Acoustic Chamber
- 2-Layer DDC Coated Black Ribbed Paper Cone
- 2" BASV High Temperature Voice Coil
- Double Pressed Treated Foam Surround
- 2-Tone Aircraft Grade Vinyl Finish
- Single 4-ohm Input
- 250 Watts RMS/500 Watts Max
- Mounting Hardware Included
- 8" Single 4-Ohm Subwoofer
- 125 watt RMS/250 Watts Max
- Proprietary DDC Coated Paper/Wool Cone
- Pressed 4-Layer Large Roll Foam Surround
- 1.5" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- 8" Dual 4-Ohm Subwoofer
- 125 watt RMS/250 Watts Max
- Proprietary DDC Coated Paper/Wool Cone
- Pressed 4-Layer Large Roll Foam Surround
- 1.5" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- Works with both XL-POD8 & XL-POD65
- Fits most standard tubes
- Inserts included fit 1.5", 1.75", 1.87" and 2.375" diameter tubes
- Two of each size included
- Premium OFC (Oxygen Free Copper) Interconnect RCA’s
- Twisted Pair and Double Shielded for Maximum Noise Rejection
- Custom Molded Connectors
- Perfect fitment for Standard or Tiffany type connections
- 6 x 9" Upgraded OEM Replacement Component System
- 80 Watts RMS/160 Watts Max
- Injection Molded PP Cone
- 20 oz. Magnet
- Nylon OEM Speaker Adapter
- 1” Inverted Titanium Dome Tweeter
- Inline Crossovers
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
-
APPLICATIONS
- 09-13 Lexus CT Front Location
- 03-14 Lexus GX Front Location
- 07-14 Lexus LS Front Location
- 04-14 Lexus RX Front Location
- 10-14 Toyota 4 Runner Front Location
- 03-09 Toyota 4 Runner Front Location
- 05-14 Toyota Avalon Front Location
- 02-11 Toyota Camry Front Location
- 07-14 Toyota FJ Cruiser Front Location
- 08-10 Toyota Highlander Front Location
- 08-14 Toyota Land Cruiser Front Location
- 10-14 Toyota Prius Front Location
- 08-14 Toyota Sequoia Front Location
- 04-09 Toyota Solara Front Location
- 05-14 Toyota Tacoma Front Location
- 07-14 Toyota Tundra Front Location
- 09-14 Toyota Venza Front Location Speakers may fit in newer make applications other than those listed above
Some vehicles are not equipped with OEM component system please use the OE-692-TY for these applications
- 60 Watts RMS/120 Watts Max
- Injection Molded PP Cone
- 10 oz. Magnet
- Nylon OEM Speaker Adapter
- 1” Inverted Titanium Dome Tweeter
- Inline Crossovers
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
-
APPLICATIONS
- 09-13 Lexus CT Rear Location
- 02-06 Lexus ES Front & Rear Locations
- 06-11 Lexus GS Front Location
- 03-12 Lexus GX Rear Location
- 01-12 Lexus IS Front Location
- 06-12 Lexus IS Rear Location
- 99-03 Lexus RX Front & Rear Locations
- 03-09 Pontiac Vibe Rear Location
- 05-12 Scion TC Front & Rear Locations
- 04-07 Scion XA Front & Rear Locations
- 04-12 Scion XB Front Location
- 08-12 Scion XB Rear Location
- 08-11 Scion XD Front & Rear Locations
- 05-11 Toyota Avalon Rear Location
- 00-05 Toyota Celica Front & Rear Locations
- 01-12 Toyota Corolla Front Location
- 00-05 Toyota Echo Front Location
- 08-12 Toyota Highlander Rear Location
- 02-11 Toyota Matrix Front & Rear Location
- 01-11 Toyota Prius Front & Rear Location
- 01-11 Toyota RAV4 Front & Rear Locations
- 08-12 Toyota Sequoia Front & Rear Locations
- 98-12 Toyota Sienna Front & Rear Locations
- 98-03 Toyota Solara Front Location
- 05-13 Toyota Tacoma Rear Location
- 00-13 Toyota Tundra Rear Location
- 03-06 Toyota Tundra Front Location
- 09-11 Toyota Venza Rear Location
- 07-12 Toyota Yaris Front Location
- 07-12 Toyota Yaris Lift Back Rear Location Speakers may fit in newer make applications other than those listed above
Some vehicles are not equipped with OEM component system please use the OE-652-TY for these applications
- 6.5" Upgraded OEM Replacement Co-Axial Speakers
- 60 Watts RMS/120 Watts Max
- Injection Molded PP Cone
- Nylon OEM Speaker Adapter
- 1” Silk Dome Tweeter
- 10 oz. Magnet
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
-
APPLICATIONS
- 09-13 Lexus CT Rear Location
- 02-06 Lexus ES Front & Rear Locations
- 06-11 Lexus GS Front Location
- 03-12 Lexus GX Rear Location
- 01-12 Lexus IS Front Location
- 06-12 Lexus IS Rear Location
- 99-03 Lexus RX Front & Rear Locations
- 03-09 Pontiac Vibe Rear Location
- 05-12 Scion TC Front & Rear Locations
- 04-07 Scion XA Front & Rear Locations
- 04-12 Scion XB Front Location
- 08-12 Scion XB Rear Location
- 08-11 Scion XD Front & Rear Locations
- 05-11 Toyota Avalon Rear Location
- 00-05 Toyota Celica Front & Rear Locations
- 01-12 Toyota Corolla Front Location
- 00-05 Toyota Echo Front Location
- 08-12 Toyota Highlander Rear Location
- 02-11 Toyota Matrix Front & Rear Location
- 01-11 Toyota Prius Front & Rear Location
- 01-11 Toyota RAV4 Front & Rear Locations
- 08-12 Toyota Sequoia Front & Rear Locations
- 98-12 Toyota Sienna Front & Rear Locations
- 98-03 Toyota Solara Front Location
- 05-13 Toyota Tacoma Rear Location
- 00-13 Toyota Tundra Rear Location
- 03-06 Toyota Tundra Front Location
- 09-11 Toyota Venza Rear Location
- 07-12 Toyota Yaris Front Location
- 07-12 Toyota Yaris Lift Back Rear Location Speakers may fit in newer make applications other than those listed above
Some vehicles are equipped with OEM component system please use the OE-65C-TY for these applications
- 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
- 80 Watts RMS/160 Watts Max
- Injection Molded PP Cone
- Nylon OEM Speaker Adapter
- 1” Silk Dome Tweeter
- 20 oz. Magnet
- Factory Plug and Play Wiring Adapters
- 4-ohm System Impedance
-
APPLICATIONS
- 09-13 Lexus CT Front Location
- 03-14 Lexus GX Front Location
- 07-14 Lexus LS Front Location
- 04-14 Lexus RX Front Location
- 10-14 Toyota 4 Runner Front Location
- 03-09 Toyota 4 Runner Front Location
- 05-14 Toyota Avalon Front Location
- 02-11 Toyota Camry Front Location
- 07-14 Toyota FJ Cruiser Front Location
- 08-10 Toyota Highlander Front Location
- 08-14 Toyota Land Cruiser Front Location
- 10-14 Toyota Prius Front Location
- 08-14 Toyota Sequoia Front Location
- 04-09 Toyota Solara Front Location
- 05-14 Toyota Tacoma Front Location
- 07-14 Toyota Tundra Front Location
- 09-14 Toyota Venza Front Location Speakers may fit in newer make applications other than those listed above
Some vehicles are equipped with OEM component system please use the OE-69C-TY for these applications
- Wired Remote Controler
- Controls all Functions on all XL Series Soundbars
- Power, Source Input, Bluetooth On/Off, Track Up/Down & Volume Up/Down
- Water Resistant Cables and Conectors
- Flush Mounted
- Plug and play
- Detente buttons for easy use with gloves
- Adjustable Aluminum Soundbar C-Clamps
- For use with XL Series Soundbars
- Fits 1.5" - 2.75" waketowers and roll bars
- Non-corrosive black powder coated aluminum
- Stainless steel hardware included
- 10 Speaker 400 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 8 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1.25” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP )
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- 8 Speaker 300 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1.25” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED backlit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 3 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- 670 Watt 3 Channel High Efficiency Full-Range Class D Design
- 2-OHM Stable Stereo Amplifier
- International Rectifier® Chip Set
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- Conformal Coated PC Board
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- High Current Voltage Ripple Rejection Circuitry
- 3.5mm AUX Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low/High Pass Electronic Crossover
- Variable 18dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.