STA-10 10" Amplified Bass Enclosure
- Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 10” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 200 Watt High Efficiency Class D Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 10.9"W x 3.2"H x 14.4"D
Read more
STA-10 SINGLE 10" AMPLIFIED UNDER SEAT SUBWOOFER
The STA-10 features an Ultra Efficient Class D mono amplifier perfectly matched to power the 10-inch woofer in our exclusive passive radiator design for more bass in less space. We developed a compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 10-inch subwoofer. The geometric design maximizes transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer and the result is cleaner, deeper bass in a very small space.
Supplied with “plug in” connectors for speaker and power, installation is simple and straightforward. Also since no holes need to be cut the STA-10 is a perfect choice for leased vehicles that could use a little extra bass.
STA-10 Amplified Sub Enclosure:
Aluminum Enclosure with a lighted logo badge all CAD (Computer Aided Design) for maximum output in small spaces
10-inch Polypropylene Woofer with 40 oz ferrite magnet and pole venting
200 watts RMS Mono Amplifier (400 watts Peak Music Power) featuring variable Gain, Low Pass and Bass EQ
High / Low Input Compatible with OEM or aftermarket radios
Variable Remote Gain Control (Included)
Specifications
- Selectable Subwoofer EQ: 0dB - 12 dB @ 45 Hz
- Inputs: Low Level (RCA)/High Level (speaker level)
- Equalization Boost/Cut: 0dB - 12 dB
- Subwoofer Frequency Range: 20 Hz - 200 Hz
- Power Supply: Unregulated PWM
- Height: 3.2"
- Width: 10.9"
- Depth: 14.4"
- Material: Extruded Aluminum
- 2-ohm Power: 200 watts RMS / 400 watts max
- Subwoofer EQ Frequency: 45 Hz
- Variable Subwoofer EQ: 0dB - 12 dB
- Low-Pass Crossover Freq: 40 Hz - 200 Hz
- Dimensions (in Inches): 3.2" x 14.4" x 10.9"
- Input Sensitivity: 250 mV - 6V (low level)/1.0V - 10 V
- S/N Ratio: >85 dB
- Total Harmonic Distortion: 0.5% at Rated Power
- Output Power (14.4 V) @ 2 ohm: 200 watts RMS / 400 watts max
- Channels (mono): 1
- Frequency Response: 20 Hz - 200 Hz
Downloads
STA-10 10" Amplified Bass Enclosure
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
