POWERBASS
Mobile Audio
SHOW
SORT BY
FILTER
- 330’ 12 Gauge Speaker Wire
- 135 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
- Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 8” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 150 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 9.75"W x 2.75"H x 13.5"D
- Converts Speaker Level to Low Level RCA for our XMA and XL Amplifiers
- Easy Installation w/Pro-lock inputs
- 6x9" Thin Mount Co-Axial Speaker System
- OEM Drop in Replacement Design
- Grey Injection Molded PP/Carbon Fiber Cone
- Butyl Rubber Surround
- 10 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 0.75" Aluminum Dome Tweeter
- SEL Tweeter Ring (Sound Expander Lens)
- 2-ohm System Impedance
- 7" Woofer/Speaker System
- OEM Drop in Replacement Design
- Grey Injection Molded PP/Carbon Fiber Cone
- Butyl Rubber Surround
- 16 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 2-ohm System Impedance
- Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 60 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Orange-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 17' Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 80 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 4 Gauge Orange-Flex Power Wire
- 7' 4 Gauge Black-Flex Ground Wire
- 17' 16 Gauge Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- 12" Single 4-Ohm Woofer
- 250 watt RMS/500 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
- 10" Single 4-Ohm Woofer
- 225 watt RMS/450 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
- Computer Optimized 10" Thin Subwoofer Enclosure
- 275 watt RMS/550 Watts Max
- One Piece Injection Molded Cone
- Single Piece Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Single 4-ohm Input
- 3" Soft Dome Mid-range Drivers
- Proprietary DDC Impregnated Membrane
- Ultra Efficient Neodymium Magnet
- 6dB Inline Crossover Included
- 4-Ohm System Impedance
- Heavy Duty 8 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
- 60 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Blue-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 20' Blue-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- Heavy Duty 4 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
- 80 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Blue-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 20' Blue-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- Remote Wired Variable Level Controller (secondary gain control)
- Includes Bass Knob, Cable & Mounting Screws
- For use with the following PowerBass amplifier series:
- XMA Amplifiers
- XL Amplifiers
- ASA Amplifiers
- ASA3 Amplifiers
- ACS Amplifiers
- 4-Channel High to Low Level Active Converter
- 2CH/4CH Selector Switch
- Front/Rear High Level Inputs
- Front/Rear Variable Gain
- Front/Rear RCA Low Level Output
- LED Clipping Indicator
- Includes Wired Variable Remote Level Control (Rear)
- Auto Turn-On Circuitry
- Variable 13Vrms Output
- 2-Channel High to Low Level Active Converter
- Front/Rear High Level Inputs
- Front/Rear Variable Gain
- Front/Rear RCA Low Level Output
- LED Clipping Indicator
- Auto Turn-On Circuitry
- Variable 13Vrms Output
- 4-Band Active Equalizer
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Switchable main/aux input (front mounted 3.5mm jack or Rear RCA)
- Front/Rear/Sub Output
- Variable Master Volume Control
- Selectable 120/80Hz Subwoofer Crossover
- Variable Subwoofer Volume Control
- Front and Rear Output Fader
- 3 Inputs: Front Aux (3.5mm jack for MP3), Rear Aux and Rear CD (Low Level RCA)
- 9-Band Active Equalizer
- Bi-Polar Mosfet PWM Power Supply
- Frequency Response: 20HZ-40KHz
- Variable Subwoofer Frequency Roll-off 30Hz-120Hz
- Front Panel Source Selector
- Independent Subwoofer Volume Control
- Front and Rear Output Fader
- 2 Low Level RCA Inputs: Rear Aux and Rear CD
- 3 Low Level RCA Outputs: Sub, Front and Rear
- EQ Centers: 50Hz, 120Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz & 16kHz
- Single 10" 175 Watt RMS Amplified Slim Subwoofer Enclosure
- Injection Molded PP Cone Woofer
- 2" KSV Voice Coil Former
- Large Roll Butyl Rubber Surround
- Computer Optimized Sealed Enclosure
- Durable Aircraft Grade Vinyl Finish
- 1-Channel 175 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz – 200Hz
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Mounting Hardware Included
- Single 12" 200 Watt RMS Amplified Slim Subwoofer Enclosure
- Injection Molded PP Cone Woofer
- 2" KSV Voice Coil Former
- Large Roll Butyl Rubber Surround
- Computer Optimized Sealed Enclosure
- Durable Aircraft Grade Vinyl Finish
- 1-Channel 200 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz – 200Hz
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Mounting Hardware Included