3XL-63C 6.5" Component System
- 6.5" 2-Way Component Speaker System
- Twill woven S2 Fiberglass Woofer Cone
- Progressive Double Roll PU Surround
- DPI (Dynamic Phase Imaging) cap
- 16 oz. Y-35 Woofer Magnet
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket with Black Finish
- 1" Silk Dome Tweeter w/Neodymium Magnet
- Computer Aided External 12dB 2-way Crossover Network
- 3-ohm System Impedance
Home > Products >
3XL-63C 6.5" Component System
Read more
3XL SERIES COMPONENT SYSTEM
Our 3XL 6.5” Component need to be heard to truly appreciate the unique features found in these speakers. Starting with our DPI (Dynamic Phase Imaging) cap for smooth midrange reproduction to our own Emperors Silk dome tweeter, this system was meticulously engineered for listeners who want the absolute best.
The tweeters can be mounted flush, surface or on angle depending on the location and design of your vehicle. Other signature features include a twill woven S-2 Fiberglass cone and dual roll rubber surround. The computer optimized crossover network allows +3dB or -3dB of tweeter adjustment so you can tailor the high frequencies specifically for your car.
Experience heightened sound clarity and precise, crisp vocals with PowerBass finest component speaker series.
Specifications
- Nominal Impedance: 3-ohm
- Material: twill woven S-2 fiberglass / silk dome tweeter
- Magnet Size: 13 oz
- Sensitivity (1W / 1M): 86 dB
- Mounting Depth: 2.56 in
- Test Impedance:
- VC Impedance:
- Size: 6.5 in
- Sensitivity: 86 dB
- Frequency Response: 52 Hz - 22 kHz
- Power Handling (RMS/Peak): 90 / 180 watts
Downloads
3XL-63C 6.5" Component System
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
