STA-8 8" Amplified Bass Enclosure
- Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 8” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 150 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 9.75"W x 2.75"H x 13.5"D


STA-8 SINGLE 8" AMPLIFIED UNDER SEAT SUBWOOFER
The STA-8 features a Class A/B mono amplifier perfectly matched to power the 8-inch woofer in its vented enclosure design. We developed a compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 8-inch subwoofer. The geometric design maximizes transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer and result is cleaner, deeper bass in less space.
Supplied with “plug in” connectors for speaker and power installation is simple and straightforward. The addition of dual mounting straps means the BTA-8 can easily be taken out of vehicle when extra space is needed. Also since no holes need to be cut the BTA-8 is a perfect choice for leased vehicles that could use a little extra bass.
STA-8 Amplified Sub Enclosure:
Aluminum Enclosure with a lighted logo badge all CAD (Computer Aided Design) for maximum output in small spaces
8-inch Polypropylene Woofer with 40 oz ferrite magnet and pole venting
150 watts RMS Mono Amplifier (300 watts Peak Music Power) featuring variable Gain, Low Pass and Bass EQ
High / Low Input Compatible with OEM or aftermarket radios
Variable Remote Gain Control (Included)
Specifications
- Selectable Subwoofer EQ: 0dB - 12 dB @ 45 Hz
- Inputs: Low Level (RCA)/High Level (speaker level)
- Equalization Boost/Cut: 0dB - 12 dB
- Subwoofer Frequency Range: 20 Hz - 200 Hz
- Power Supply: Unregulated PWM
- Height: 2.75"
- Width: 9.75"
- Depth: 13.5"
- Material: Extruded Aluminum
- 2-ohm Power: 150 watts RMS/300 watts max
- Subwoofer EQ Frequency: 45 Hz
- Variable Subwoofer EQ: 0dB - 12 dB
- Low-Pass Crossover Freq: 40 Hz - 200 Hz
- Dimensions (in Inches): 2.75" x 9.75" x 13.5"
- Input Sensitivity: 250 mV - 6V (low level)/1.0V - 10 V
- S/N Ratio: >85 dB
- Total Harmonic Distortion: 0.5% at Rated Power
- Output Power (14.4 V) @ 2 ohm: 150 watts RMS/300 watts max
- Channels (mono): 1
- Frequency Response: 20 Hz - 250 Hz
Downloads
STA-8 8" Amplified Bass Enclosure

Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
